LEMON Manuals
: Even more car manuals for everyone
Home
>>
Jeep
>>
2024
>>
Gladiator Nighthawk, Part Time T/Case Control, Automatic Trans
>>
Repair and Diagnosis (Single Page)
>>
Restraints
>>
Restraints Control Systems
>>
Occupant Restraint Controller (Orc) - DTCS B0038-11 To B0070-11
>>
DTC Troubleshooting
>>
B0050-13 Driver SEATBELT Sensor - Circuit Open
>>
Set Condition
Set Condition
If the ORC detects the driver seat belt buckle switch circuits have been open. The active code will change to stored after the ORC verifies the driver seat belt buckle switch signal circuit voltage has returned to normal voltage range.