LEMON Manuals
: Even more car manuals for everyone
Home
>>
Jeep
>>
2024
>>
Gladiator Nighthawk, Part Time T/Case Control, Automatic Trans
>>
Repair and Diagnosis (Single Page)
>>
Engine Performance
>>
System
>>
3.6L (GPEC 5) - DTCS B23BF To B25C9
>>
DTC Troubleshooting
>>
B25C7-00-Driver Door Ajar Switch 2 Circuit Low
>>
Set Condition
Set Condition
The Powertrain Control Module (PCM) detects that the Secondary Driver Door Ajar Switch signal voltage received over the CAN C BUS from the Body Control Module (BCM) is below a calibrated threshold.