LEMON Manuals
: Even more car manuals for everyone
Home
>>
Jeep
>>
2024
>>
Gladiator Nighthawk, Part Time T/Case Control, Automatic Trans
>>
Repair and Diagnosis (Single Page)
>>
Engine Performance
>>
System
>>
3.6L (GPEC 2A) - DTCS P04D2 To P0522
>>
DTC Troubleshooting
>>
P0520-Engine Oil Pressure Sensor Circuit
>>
Set Condition
Set Condition
The Powertrain Control Module (PCM) detects an oil pressure reading that is below 0.29 volts (less than 0 psi), or greater than 0.78 volts (more than 7.1 psi), indicating a sensor that is stuck or drifted out of range.