LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Gladiator Nighthawk, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> 3.6L Engine (Service Information) (3 Of 4) >> Engine Block >> Rod, Piston And Connecting >> Cleaning >> Piston Cleaning

Piston Cleaning

CAUTION:

DO NOT use a wire wheel or other abrasive cleaning devise to clean the pistons or connecting rods. The pistons have a Moly coating, this coating must not be damaged.

CAUTION:

Do not remove the piston pin from the piston and connecting rod assembly.

  1. Clean the pistons in warm water using a suitable cleaning solvent and then towel dry.
  2. Use a wood or plastic scraper to clean the ring land grooves.