LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Renegade Red >> Repair and Diagnosis >> Transmission >> Transfer Case >> Power Transfer Unit (Service Information) >> Actuator, Shift >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the PTU actuator on the PTU. Install and tighten the PTU actuator bolts to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the PTU actuator wire harness connector.
  3. Install the right front tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals