(Brake System Control Module 2 (BSCM 2) - Electrical DIADNOSTICS)

• DTC Troubleshooting
  • B1783-00-Stop Lamp Control
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C003F-00-Wheel Speed Sensors Rotation Direction Correlation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0044-00-Brake Pressure Sensor 1
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0078-00-Tire Diameter
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C008E-00 - Ecu Internal Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0501-00-Left Front Wheel Speed Sensor Range/Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0502-00-Left Front Wheel Speed Sensor Circuit Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0503-00-Left Front Wheel Speed Sensor Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0504-00-Left Front Wheel Speed Sensor Intermittent/Erratic
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0505-00-Left Front Wheel Speed Sensor "A" Correlation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0507-00-Right Front Wheel Speed Sensor Range/Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0508-00-Right Front Wheel Speed Sensor Circuit Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0509-00-Right Front Wheel Speed Sensor Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C050A-00-Right Front Wheel Speed Sensor Intermittent/Erratic
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C050B-00-Right Front Wheel Speed Sensor "A" Correlation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C051D-00-Multi-Axis Acceleration Sensor Module "A" Missing Calibration
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0530-00-Motor Control A Range Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0534-00-Motor Control A Supply Voltage Circuit Open
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C053D-00-Brake Pressure Sensor 1 Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0555-00-Left Front Wheel Speed Sensor Incorrect Component Installed
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C0556-00-Right Front Wheel Speed Sensor Incorrect Component Installed
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C05A3-00-Wheel Speed Sensors Supply Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1009-00-Brake Fluid Level Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C107B-00-Wheel Speed Comparative Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1239-00-Emissions Rolls Test Active
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1260-00-Abs/ESC Dynamic Controls Disabled
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2100-00-Battery Voltage Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2101-00-Battery Voltage High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2102-00-System Voltage Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2103-00-System Voltage High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2129-00-Battery Voltage
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2202-00-Original VIN Mismatch/Missing
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2206-00 - Vehicle Configuration Mismatch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C2210-00 - Ecu OVERTEMPERATURE
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0602-00-Control Module Programming Error/Not Programmed
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0604-00-Internal Control Module Random Access Memory (Ram) Error
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P060B-00-Internal Control Module A/D Processing Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P062F-00-Internal Control Module EEPROM Error
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2534-00-Ignition Switch On/Start Position Circuit Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2535-00-Ignition Switch On/Start Position Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U0100-00-Engine Control Module -ECM-Pcm- Can Signal - Missing Message
  • U0101-00-Lost Communication With TCM
  • U0129-00-Lost Communication With Brake System Control Module
  • U0140-00-Lost Communication With Body Control Module
  • U0151-00-Lost Communication With Restraints Control Module
  • U0155-00-Lost Communication With Cluster-CCN
  • U015C-00-Lost Communication With Automated Driving System Control Module "A"
  • U015D-00-Lost Communication With Automated Driving System Control Module "B"
  • U0401-00-Implausible Data Received From ECM/Pcm "A"
  • U0402-00-Implausible Data Received From TCM
  • U0418-00-Implausible Data Received From Brake System Control Module 1
  • U0422-00-Invalid Data Received From Body Control Module
  • U0452-00-Implausible Data Received From Restraints Control Module
  • U045D-00-Invalid Data Received From Automated Driving System Control Module "A"
  • U045E-00-Invalid Data Received From Automated Driving System Control Module "B"
  • U104E-00-High Speed FD-Can2 Communication Bus Performance
  • U1070-00-High Speed FD-Can14 Communication Bus Performance
  • U140E-00-Implausible Vehicle Configuration Data Received
• Standard Procedure
  • BSCM 2 Intermittent Condition
    • Diagnostic Test
  • BSCM 2 Verification Test
    • Diagnostic Test