Diagnostic Test
- READ AND RECORD DTCS AND ENVIRONMENTAL DATA - ERASE DTCS AND CHECK FOR DTC TO RETURN
- With the scan tool, read DTCs in all Electronic Control Units (ECU's) and record on the repair order.
- With the scan tool, run a vehicle Scan Report, or record the Environmental Data related to the DTCs.
- With the scan tool, erase all DTCs.
- Turn the ignition off for a minimum of 10 seconds.
- Using the recorded Environmental Data and the When Monitored Conditions, operate the vehicle in the conditions that set the DTC.
- With the scan tool, read DTCs.
Did the DTC return?
Yes
- Go To 2
No
- Perform the TESTING FOR AN INTERMITTENT CONDITION. Refer to TESTING FOR AN INTERMITTENT CONDITION .
- ALLOW VEHICLE TO COOL TO AMBIENT TEMPERATURE - ERASE DTCS AND CHECK FOR DTC TO RETURN
- Move the vehicle to a cool location and allow the temperature to stabilize.
- With the scan tool, erase DTCs.
- Turn the ignition off for a minimum of 10 seconds.
- Using the recorded Environmental Data and the When Monitored Conditions, operate the vehicle in the conditions that set the DTC.
- With the scan tool, read DTCs.
Did the DTC return?
Yes
- Replace the Driver Monitoring Camera in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Moving the vehicle to a cool location corrected the condition.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .