Center Console Power Outlet

REMOVAL 

1. Disconnect and isolate the negative battery cable(s). Refer to BATTERY DISCONNECT, 3.0L and/or BATTERY DISCONNECT, 3.6L .
2. Remove the floor console end cap. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Outlet

3. Disconnect the wire harness connectors from the 115 volt power outlet.
4. Push in on the four tabs to release the 115 volt power outlet from the panel.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.