LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Compass Trailhawk >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Strut, Rear >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to TIRES & WHEELS, REMOVAL AND INSTALLATION .
    GC0178796Courtesy of CHRYSLER GROUP, LLC
  3. Remove the brake hose retainer clip (1) and remove the brake hose (4) from the strut.
  4. Remove the wheel speed sensor harness (2) from the strut.
  5. Remove the Electric Park Brake (EPB) harness from the strut.
  6. Using (special tool #2027800020, Kit, Remover - Installer Shock / Strut), remove the stabilizer bar link from the strut. Refer to LINK, STABILIZER BAR, REMOVAL AND INSTALLATION .
    GC0179347Courtesy of CHRYSLER GROUP, LLC
  7. Remove the two strut lower bolts (1).
    GC0178964Courtesy of CHRYSLER GROUP, LLC
  8. Remove and DISCARD  the three strut upper mount bolts (1).
  9. Remove the strut (2).
scientia non olet · About LEMON Manuals