LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Compass Red >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Link, Stabilizer Bar >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0178874Courtesy of CHRYSLER GROUP, LLC
  1. Insert the stabilizer bar link (2) studs in the strut and stabilizer bar, then install two NEW  nuts (1) on the stabilizer bar link studs.
  2. Tighten the nuts to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
  3. Install the tire and wheel assembly. Refer to TIRES & WHEELS, REMOVAL AND INSTALLATION .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals