LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Compass Red >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) (2 Of 2) >> Module, Powertrain Control (Pcm) >> Removal And Installation >> Powertrain Control Module (Pcm)

Powertrain Control Module (Pcm)

  1. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  2. Disconnect and isolate the negative battery cable.
    GC0206821Courtesy of CHRYSLER GROUP, LLC
    1 - PCM Retaining Nut
    2 - PCM Wire Harness Connector
    3 - Wire Harness Connector
    4 - Wire Harness Securing Tab
    5 - Main Engine Wire Harness Connector
  3. Disconnect the Powertrain Control Module (PCM) electrical connectors.
  4. Release the Wire Harness from the PCM bracket.
  5. Remove the PCM retaining nuts.
  6. Remove the PCM from the vehicle.
scientia non olet · About LEMON Manuals