LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Compass Altitude >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Link, Stabilizer Bar >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly. Refer to TIRES & WHEELS, REMOVAL AND INSTALLATION .
    GC0178874Courtesy of CHRYSLER GROUP, LLC
  3. Hold the stabilizer bar link stud stationary, then remove and DISCARD  both stabilizer bar link nuts (1).
  4. Remove the stabilizer bar link (2).
scientia non olet · About LEMON Manuals