LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Compass Altitude >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Module Seals >> Removal And Installation >> Rear Drive Module Output Seal >> Installation

Rear Drive Module Output Seal: Installation

NOTE:

Use care when installing half shaft to axle assembly. The half shaft installation angle should be minimized to avoid damage to the seal upon installation.

  1. Install a NEW  oil seal.
  2. Install a NEW  dust cover.
  3. Install the rear halfshaft. Refer to SHAFTS, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals