LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2023 >> Cherokee Trailhawk >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> 2.0L Fuel System >> Fuel Injection, Gas >> Pedal, Accelerator >> Removal

Pedal, Accelerator: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0187031Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the accelerator pedal wire harness connector (1).
  3. Remove the three screws (2) that secure the accelerator pedal assembly.
  4. Remove the accelerator pedal assembly from the vehicle.
scientia non olet · About LEMON Manuals