| Front Stabilizer Bar Bracket to Crossmember Bolt |
45 |
33 |
- |
|
| Hub Nut |
71 + 47° |
52 + 47° |
- |
Do not
reuse fastener. If removed, a new
fastener must be installed and tightened to specifications. |
| Hub and Bearing to Knuckle Bolts |
105 |
77 |
- |
|
| Lower Ball Joint to Knuckle Bolt |
60 |
44 |
- |
|
| Lower Control Arm to Rear Crossmember Bolt |
125 |
92 |
- |
|
| Lower Control Arm to Crossmember Vertical Bolt |
130 + 90° |
96 + 90° |
- |
Do not
reuse fastener. If removed, a new
fastener must be installed and tightened to specifications. |
| Lower Control Arm to Crossmember Horizontal Bolt |
130 + 90° |
96 + 90° |
- |
Do not
reuse fastener. If removed, a new
fastener must be installed and tightened to specifications. |
| Stabilizer Bar Link to Stabilizer Bar Nut |
80 |
59 |
- |
Do not
reuse fastener. If removed, a new
fastener must be installed and tightened to specifications. |
| Stabilizer Bar Link to Strut Nut |
80 |
59 |
- |
Do not
reuse fastener. If removed, a new
fastener must be installed and tightened to specifications. |
| Strut to Body Bolts |
60 |
44 |
- |
|
| Strut to Knuckle Nuts |
100 + 90° |
74 + 90° |
- |
Do not
reuse fastener. If removed, a new
fastener must be installed and tightened to specifications. |
| Strut Rod to Strut Mount Nut |
70 |
52 |
- |
|