Integrated Center Stack (Ics)

REMOVAL 

1. Remove the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Integrated Center Stack (ICS)

   2 - Bezel

2. Working from the backside of the instrument panel center bezel (2), compress the retaining clips on the Integrated Center Stack (ICS) (1).
3. Carefully push on the rear of the ICS, and remove the ICS from the bezel.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• Press together firmly to fully seat retaining clips.