Global Telematics Box Module (TBM2)

REMOVAL 

1. Remove the glove box door. Refer to DOOR, GLOVE BOX, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

   2 - Antenna and Wire Harness Connectors

   3 - Global Telematics Box Module (TBM2)

2. Through the glove box opening, disconnect the antenna and wire harness connectors from the Global Telematics Box Module (TBM2).
3. Remove the fasteners (1) from the TBM2 (3) and remove the TBM2 through the glove box opening.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• Tighten the fasteners securely.