Battery System
TORQUE SPECIFICATIONS - BATTERY SYSTEM
| DESCRIPTION | SPECIFICATION | COMMENT |
|---|---|---|
| AUX Battery M6 Nut to Battery Cable | 5 N. m (44 In. Lbs.) | - |
| AUX Battery M6 Double Torx Stud | 7 N. m (63 In. Lbs.) | - |
| AUX Battery Hold Down Nut | 5 N. m (44 In. Lbs.) | - |
| Battery Bracket Bolt | 5 N. m (44 In. Lbs.) | - |
| Battery Hold-Down Bolts/Nuts | 5 N. m (44 In. Lbs.) | - |
| Battery Negative Cable End Nut | 7 N. m (63 In. Lbs.) | - |
| Battery Negative Cable to the IBS | 11 N. m (8 Ft. Lbs.) | - |
| Battery Negative Lead to Fender | 20 N. m (15 Ft. Lbs.) | - |
| Battery Negative Cable to Engine Block | 41 N. m (30 Ft. Lbs.) | - |
| Battery Positive B(+) at Bulkhead Captured Nut | 15 N. m (11 Ft. Lbs.) | - |
| Battery Positive B(+) at Bulkhead Isolator Nut | 6 N. m (53 In. Lbs.) | - |
| Battery Positive B(+) at Power Distribution Center (PDC) M8 Nut | 15 N. m (11 Ft. Lbs.) | - |
| Battery Positive B(+) at Power Distribution Center (PDC) M6 Nut | 8 N. m (71 In. Lbs.) | - |
| Battery Positive Cable Nut | 7 N. m (63 In. Lbs.) | - |
| Battery Positive Cable End Nut | 7 N. m (63 In. Lbs.) | - |
| Battery Tray Bolts | 10 N. m (89 In. Lbs.) | - |
| Frame Reinforcement Brace | 20 N. m (15 Ft. Lbs.) | - |
| Intelligent Battery Sensor (IBS) Sensor to Negative Post | 6 N. m (53 In. Lbs.) | - |
| Interior Battery Cable Clamp to Battery Post | 6 N. m (53 In. Lbs.) | - |
| Power Distribution Center (PDC) to Wiring Connector | 4 N. m (35 In. Lbs.) | - |
| Power Distribution Center (PDC) to B(+) | 12 N. m (9 Ft. Lbs.) | - |
| Dual Battery Switch Module (DBSM) to Power Distribution Center (PDC) | 9 N. m (80 In. Lbs.) | - |
| Power Distribution Center (PDC) Tray To Cross Beam Nuts | 9 N. m (80 In. Lbs.) | - |
| Battery Clamp To Pass Through Stud | 15 N. m (11 Ft. Lbs.) | - |