Body Control Module (BCM)
BODY CONTROL MODULE (BCM)
| Refer to COMPONENT INDEX . |
The BCM is used in the exterior power mirror system to provide vehicle configuration data and commanded ignition input to the DCMs.
Inputs
- Command Ignition State
- Vehicle configuration data
- Feature request configuration from the Radio
- Configuration status (ON/OFF) requests from the Radio
- Transmission PRND and reverse gear status position from the Transmission Control Module (TCM)
- CRVMM EC mirror Status
- Operational status and reflectance value of the EC sensors from the CRVMM
- CRVMM error report signal
Outputs
- Vehicle configuration information
- EC mirror Auto Dim enable/disable to the CRVMM
- EC mirror status
- Commanded ignition status
- PRND status to the CRVMM
- Controller Area Network-Interior High Speed (CAN-IHS) Pulse-Width Modulated (PWM) outside mirror dimming signal to the DCR
- Mirror enable request to the CRVMM