LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Compass Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Sensor, Air Temperature, Intake >> Removal And Installation >> 2.4L >> Removal

Removal And Installation: 2.4L: Removal

  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
    GC0163254Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the electrical connector (1) from the intake air temperature sensor (2).
  3. Rotate the intake air temperature sensor 1/4 turn counter clockwise and remove the sensor from the clean air hose.
  4. The sensor O-ring seal can be reused if not damaged.
scientia non olet · About LEMON Manuals