LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Power Transfer Unit (Service Information)) >> Switch, Transfer Case >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Inspect the Select Terrain switch for damage.
  2. Install the Select Terrain switch into the media hub, verifying the retaining clips are properly seated.
  3. Connect the Select Terrain switch wire harness connector.
  4. Install the floor console. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION or CONSOLE, FLOOR, END CAP, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals