Diagnostic Test

WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

DETERMINE ACTIVE OR STORED DTC
1. Make sure the battery is fully charged.
2. Turn the ignition on.
3. Wait 12 seconds, then with the scan tool, read all active OCM DTCs.
  Is the DIAGNOSTIC TROUBLE CODE (DTC) active or stored?
  
  OCM - ACTIVE DTC
  - Go To 2
  OCM - STORED DTC
  - Perform the RESTRAINTS SYSTEM INTERMITTENT TEST. Refer to OCCUPANT-CLASSIFICATION MODULE INTERMITTENT TEST .
PERFORM PROXI ALIGNMENT PROCEDURE
1. Using the scan tool, insure BCM is programmed correctly and perform PROXI alignment procedure.
  Is the DTC still active?
  
  Yes
  - Replace the Occupant Classification Module (OCM) and seat cushion foam in accordance with Service Information. Refer to MODULE, OCCUPANT CLASSIFICATION (OCM), REMOVAL AND INSTALLATION .
  - Perform the OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST. Refer to OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST .
  No
  - Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .