LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Trailer Tow (TTM) >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE:

If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to align the PROXI configuration data into the new ECU. Follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under Body Control Module (BCM) Miscellaneous Functions menu.

  1. Disconnect and isolate the negative battery cable.
  2. Remove the left rear storage tub.
    GC0179256Courtesy of CHRYSLER GROUP, LLC
  3. Disengage the retaining clip (2) securing the Trailer Tow Module (TTM) to the body and remove the TTM from the body.
  4. Disconnect and the TTM wire harness connectors (1).
  5. Remove the TTM from the vehicle.
scientia non olet · About LEMON Manuals