Blind Spot Module (BSM)/Blind Spot Sensor (BSS)
BLIND SPOT MODULE (BSM)/BLIND SPOT SENSOR (BSS)
| Refer to COMPONENT INDEX . |
- Each BSS is integrated with the BSM.
- Each sensor receives a fused ignition RUN/Accessory power output protected by a 7.5A fuse located in the BCM
- The Blind Spot sensors are mounted to the inside of the rear fascia.
- The Left Blind Spot Sensor (LBSS) and the Right Blind Spot Sensor (RBSS) are two independent control units.
- Each sensor communicates over CAN-IHS to its respective side mirror to illuminate the LED icon
- Each sensor sets its own diagnostic faults.
- The detection zone covers a grid approximately one lane on both sides of the vehicle 3.2 meters (10 feet) and extends from the B-pillar to 3 meters (10 feet) behind the rear fascia.