LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Power Liftgate (PLGM) >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the PLGM and connect the wiring harness.
  2. Install the rear quarter trim. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .
  3. Install the liftgate sill plate. Refer to PLATE, SCUFF, LIFTGATE SILL, REMOVAL AND INSTALLATION .
  4. Install the spare tire and wheel.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals