Removal And Installation: Removal

Set the parking brake.
Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION or CONSOLE, FLOOR, END CAP, REMOVAL AND INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC
Remove the shifter cable end (1) from the shifter ball stud and detach the shifter cable from the shifter cable bracket (2).

Courtesy of CHRYSLER GROUP, LLC
Detach the shifter cable end (1) from the transmission manual lever.

Courtesy of CHRYSLER GROUP, LLC
Detach the shifter cable (1) from the transmission shifter cable bracket.

Courtesy of CHRYSLER GROUP, LLC
Detach the shifter cable (1) from the clip.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the exhaust heat shield.
Remove the nuts for the shifter cable grommet and plate assembly.
Pull the shifter cable and plate assembly through the opening in the floor pan.
Remove the shifter cable from the vehicle.