Negative Battery Cable: Installation
WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Position the negative battery cable for installation.
- Connect the cable terminal to the chassis ground (1a), then screw the nut (1b) and tighten it to the specified torque.
- Connect the terminal to the gearbox of the ground wire (1a), then tighten the screw (2a) and tighten to the specified torque.
- Install the left front wheel splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
- Engage the ground lead to the retaining clip.
- Connect the negative battery terminal to the battery. Refer to STANDARD PROCEDURE .
- If equipped with press connect terminal, Connect the terminal to the negative battery pole.