Steering Gear: Remove & Replace
WARNING: This page is about the Compass Altitude, 4WD, which is a different variant/trim than selected.
Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Mfr Body CD MP | 4.8 | B | ||
| Additional Procedure: STEERING GEAR: Remove & Replace: | ||||
| Where Skid Plate interferes add | 0.4 | B | ||
| Combination Procedure: ADAPTIVE CRUISE CONTROL SYSTEM: Calibrate: | ||||
| Includes: Additional time for use of scan tool to perform this procedure. | 0.5 | B | ||
| Combination Procedure: STEERING ANGLE SENSOR: Calibrate: | ||||
| Includes: Additional time for use of scan tool to perform this procedure. | 0.3 | B | ||
| Combination Procedure: TIE ROD &/OR END: Replace: | ||||
| Each | 0.1 | B | ||