LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Cherokee X >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Link, Stabilizer Bar >> Installation

Link, Stabilizer Bar: Installation

GC0160096Courtesy of CHRYSLER GROUP, LLC
  1. Install the stabilizer bar link (2) upper stud in the end of the stabilizer bar from the inboard side. Install the stabilizer bar link to stabilizer bar nut (1) to the upper stud and, while holding the stabilizer bar link stud stationary, tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS .
    GC0159361Courtesy of CHRYSLER GROUP, LLC
  2. Attach the stabilizer bar link to the spring link (6). Install the stabilizer bar link to spring link nut (5) to the lower stabilizer bar link stud and, while holding the stabilizer bar link lower stud stationary, tighten the to the proper specifications. Refer to TORQUE SPECIFICATIONS .
  3. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals