LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Cherokee X >> Repair and Diagnosis >> Engine Performance >> 3.2L Ignition System (Service Information) >> Sensor, Camshaft Position >> Removal >> 2.4L

Sensor, Camshaft Position: Removal: 2.4L

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover.
    GC0186881Courtesy of CHRYSLER GROUP, LLC
  3. Remove the nut (2) and the Camshaft Position (CMP) Sensor heat shield (1).
    GC0187102Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the wiring harness connector (1).
    GC0186974Courtesy of CHRYSLER GROUP, LLC
  5. Remove stud bolt (2) and CMP sensor (1) from the front of the cylinder head.
scientia non olet · About LEMON Manuals