Diagnostic Test

CHECK FOR AN ACTIVE DTC 

1. Turn the ignition on.
2. Press the Rear Washer Switch twice.
3. With the scan tool, read DTCs.

   Does the scan tool display this DTC as active?

   Yes 

   • If the Rear Washer Switch is free of any debris or foreign material that may cause a stuck switch, replace the Steering Column Control Module (SCCM) in accordance with the Service Information. Refer to MODULE, STEERING COLUMN CONTROL (SCCM), REMOVAL .
   • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .

   No 

   • Test complete. The condition or conditions that originally set this DTC are not present at this time.
   • Perform the appropriate TESTING FOR AN INTERMITTENT diagnostic procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .