Right Cylinder Head

Courtesy of CHRYSLER GROUP, LLC

Install the Variable Valve Timing (VVT) solenoid seals (1). The seals can be reused if not damaged.

Courtesy of CHRYSLER GROUP, LLC
Refer to the markings made at disassembly and install the intake VVT solenoid (2) and the exhaust VVT solenoid (4) in their original locations.
Install the VVT solenoid mounting bolts (3) and securely tighten.
Connect the wiring harness connector (1) to the VVT solenoid.
Install the resonator. Refer to RESONATOR, AIR CLEANER, INSTALLATION .
Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.

NOTE:

The Cam/Crank Variation Relearn procedure must be performed using the scan tool anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components.