Starting System (Service Information): Starter: Installation: 3.2L

Courtesy of CHRYSLER GROUP, LLC

1. Position the starter (3) inside the transmission.
2. Install the starter mounting bolts (4) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS - GAS ENGINE .
3. Connect the starter solenoid electrical connector (1) to starter solenoid terminal.
4. Install the B(+) battery cable and nut to the solenoid stud (2) and tighten to the proper specifications. Refer to TECHNICAL SPECIFICATIONS .

   Courtesy of CHRYSLER GROUP, LLC

5. Install the catalytic converter (3). Refer to INSTALLATION .
6. Remove the support and lower the vehicle.
7. Connect the negative battery cable(s). Refer to STANDARD PROCEDURE .