LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2022 >> Cherokee Trailhawk >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System (Service Information) >> Tray, Battery >> Installation >> Gas

Tray, Battery: Installation: Gas

  1. Position the battery tray onto the frame rail.
    GC0170006Courtesy of CHRYSLER GROUP, LLC
  2. Install the outer frame rail fastener and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS .
    GC0169928Courtesy of CHRYSLER GROUP, LLC
  3. Install the bolts (1) that secure the battery tray to the inner frame rail and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS .
  4. Install the hood cable and guide retainer (2).
    GC0169920Courtesy of CHRYSLER GROUP, LLC
  5. Install the fastener (1) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS .
    GC0170003Courtesy of CHRYSLER GROUP, LLC
  6. Install the bolt that secures the washer solvent bottle to the battery tray (1).
  7. Install the inner splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, INSTALLATION .
  8. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  9. Install the wiring harness onto the battery tray.
  10. Install the Powertrain Control Module. Refer to MODULE, POWERTRAIN CONTROL (PCM), INSTALLATION .
  11. Install the battery onto the battery tray. Refer to BATTERY, INSTALLATION .
scientia non olet · About LEMON Manuals