LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Renegade Trailhawk >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 948TE Automatic Transmission (Service Information) >> Cover >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the cover plate with a NEW  gasket.
  2. Install the cover plate fasteners and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
  3. Check the transmission fluid level. Refer to FLUID AND FILTER, STANDARD PROCEDURE .
  4. Install the left inner splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION or SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL AND INSTALLATION .
  5. Install the left front wheel and tire assembly. Refer to REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals