LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Renegade Trailhawk >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Outlet, Power >> Removal And Installation >> Rear Power Outlet >> Installation

Rear Power Outlet: Installation

  1. Check that the connector is not damaged.
  2. If removed, replace the rear power outlet cover.
  3. Connect the rear power outlet wire harness connector.
  4. Install the rear power outlet.
  5. Close the cover of the rear power outlet.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals