LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Link, Stabilizer Bar >> Installation

Link, Stabilizer Bar: Installation

NOTE:

Ensure that the stabilizer link nuts are equipped with an encapsulated washer nut assembly upon installation. 

GC0173569Courtesy of CHRYSLER GROUP, LLC
  1. Position the stabilizer link (6) to the vehicle.
  2. Install a NEW  stabilizer link upper nut and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
  3. Install a NEW  stabilizer link lower nut (4) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals