Damper, Vibration: Installation
WARNING: This page is about a different variant/trim than selected.
- Ensure that the front crankshaft seal surface (1) is clean and free of any dust, dirt, or debris.
- Align the crankshaft vibration damper (1) to the flywheel key on the crankshaft and install the damper. Seat the damper on the crankshaft sprocket.
- Install and hand tighten the crankshaft vibration damper bolt (2).
- Hold the crankshaft vibration damper (1) with Vibration Damper Holder (special tool #10198, Holder, Vibration Damper) (2) and tighten the crankshaft vibration damper bolt to the proper specifications.
Refer to TORQUE SPECIFICATIONS .
- Install the accessory drive belt. Refer to 3.6L .