Cover(S), Engine Timing: Removal
- Remove the supercharger. Refer to SUPERCHARGER, REMOVAL .
- Remove the supercharger belt tensioner. Refer to TENSIONER, DRIVE BELT, REMOVAL .
- Remove the water pump. Refer to PUMP, WATER, REMOVAL
.
- Disconnect the camshaft position sensor wire harness connector (1).
- Remove A/C compressor from the engine timing chain cover and position aside. Refer to COMPRESSOR, A/C, REMOVAL .
- Remove the upper idler pulley or power steering pump bolts, depending on how equipped, and position aside.
- Remove the generator from the engine timing chain cover and position aside. Refer to GENERATOR, REMOVAL .
- Remove the vibration damper. Refer to REMOVAL
.
- Remove the five front oil pan to timing cover bolts (1).
- Remove the right side coolant tube retaining bolt from the rear of the timing cover (1).
- Remove the engine timing cover retaining bolts (2) and remove the engine timing cover (1).