LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Electrical >> Gauges >> Universal Transmitter >> Standard Procedure >> Erasing HOMELINK® Transceiver Codes

Erasing HOMELINK® Transceiver Codes

NOTE:

Individual channels cannot be erased. Erasing the HomeLink® transceiver codes will erase ALL programmed codes.

To erase programming from all three buttons (individual buttons cannot be erased but can be reprogrammed), press and hold the two outer HomeLink® transceiver buttons until the indicator light begins to flash after about 20 seconds. Release both buttons. Do not hold for longer that 30 seconds. HomeLink® is now in the train (or learning) mode and can be programmed at any time beginning with Programming. Refer to PROGRAMMING HOMELINK® TRANSCEIVER CODES  .

scientia non olet · About LEMON Manuals