LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Vehicle Theft Security (Service Information) >> Module, Intrusion >> Installation

Module, Intrusion: Installation

GC0146812Courtesy of CHRYSLER GROUP, LLC
  1. Position the Intrusion Transceiver Module (ITM) (2) into the integral mount on the overhead console housing. Make sure all of the retainers are fully engaged
  2. Connect the wiring harness connector (1) into the ITM.
  3. Install the overhead console. Refer to CONSOLE, OVERHEAD, FRONT, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals