LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Grand Cherokee Trackhawk >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Instrument Panel Cluster (IPC) >> Installation >> Cluster Hood, Lens And Mask

Cluster Hood, Lens And Mask

GC0158370Courtesy of CHRYSLER GROUP, LLC
  1. Position the cluster lens (2), over the face of the instrument cluster (1).
  2. Press firmly and evenly on the lens, until each of the latches are fully engaged around the perimeter of the cluster housing.
    GC0158377Courtesy of CHRYSLER GROUP, LLC
  3. Install the Instrument Cluster Bezel (2)

    Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .

  4. Install the instrument cluster into the instrument panel. Refer to CLUSTER ASSEMBLY .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals