LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Grand Cherokee Trackhawk >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Electronic Limited Slip Differential (ELSD) >> Installation

Module, Electronic Limited Slip Differential (ELSD): Installation

GC0146895Courtesy of CHRYSLER GROUP, LLC
  1. Install the Electronic Limited Slip Differential (ELSD) module (1) in the vehicle.
  2. Secure the module mounting nuts (2) and tighten to 7 N. m (5 ft. lbs.).
  3. Connect the body wire harness connectors (3) to the module connector receptacle.
  4. Install the carpet to its original position.
  5. Install the left rear seat. Refer to INSTALLATION .
  6. Connect the negative battery cable. Refer to CABLES, BATTERY, INSTALLATION .
  7. Perform the Electronic Limited Slip Differential (ELSD) Module Verification Test. Refer to ELSD VERIFICATION TEST .
scientia non olet · About LEMON Manuals