Pump, Water: Removal: 5.7L/6.4L
NOTE:
5.7L shown. 6.4L similar.
- Disconnect the negative battery cable.
- Remove the air intake assembly. For 5.7L refer to REMOVAL , or for 6.4L Refer to BODY, AIR CLEANER, REMOVAL .
- Remove the resonator mounting bracket.
- Drain the coolant into a clean container. Refer to DRAINING .
- Remove the upper radiator hose from the thermostat housing (1) and position aside.
- Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
- Remove the idler pulley (5).
- Remove the belt tensioner assembly (4). Refer to TENSIONER, BELT, REMOVAL .
- Remove the lower radiator hose from the water pump and position aside.
- Remove the upper metal heater tube from the cylinder head.
- Remove the water pump mounting bolts (6) and remove the pump (3).