LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Grand Cherokee SRT >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Knock >> Removal >> 6.4L >> Right Side

Right Side

  1. Raise and support the vehicle.
  2. Remove the knock sensor heat shield.
    GC0080083Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the knock sensor (1) wire harness connector (5).
  4. Remove the knock sensor retaining bolt (2).
  5. Remove the knock sensor from the cylinder block.