System Signals
Related ECUs and their associated signals:
NOTE:
(*) information from ECU not connected to this specific CAN. The BCM is the gateway used for the signals between the CANs listed below.
| Input/Output Communications To System CAN ECUs: CAN-C, CAN-FD-1, 3, and LVDS | ||
|---|---|---|
| CAN-C | BCM | Ambient temperature. |
| The high beam output status. | ||
| The calculation of the pitch and roll angle. | ||
| Battery voltage. | ||
| Headlamp switch position | ||
| (*) BSM | Average vehicle speed. | |
| Yaw / lateral rate. | ||
| Left front, right front, left rear, right rear wheel status | ||
| (*) IPC | Night vision display status on the cluster screen. | |
| Total odometer value. | ||
| Night vision setting | ||
| NVPM | Night vision pedestrian and animal detection status. | |
| Night vision page and pop up display information. | ||
| Night vision page request. | ||
| Night vision warning available status. | ||
| External lights low beam status, left and right front chime activation request. | ||
| (*) PCM | Engine Stop Start (ESS) status. | |
| (*) TCM | Transmission shift lever position. | |
| CAN-FD-1 | Air Suspension Control Module (ASCM) | Air suspension status. |
| CAN-FD-3 | BCM | Ignition switch position. |
| Night vision page display information. | ||
| Night vision page request. | ||
| Night vision pedestrian and animal detection status. | ||
| Night vision pop up and telltale display information. | ||
| BSM | Left front, right front, left rear, right rear wheel status. | |
| Pitch / longitudinal acceleration value. | ||
| Yaw / lateral acceleration value. | ||
| IPC | Night vision display status. | |
| Night vision setting. | ||
| Total odometer value. | ||
| PCM | Engine Stop Start (ESS) status. | |
| TCM | Transmission shift lever position. | |
| LVDS | NVPM | Images from the night vision camera. |