TPMS Reminder Reset - Procedure 02
NOTE:
Use the following procedure to retrain all 4 road wheel tire pressure sensors. No attempt should be made to retrain individual sensors.
- Retrieve Relearn Magnet (8821).
- Press MENU Button on EVIC until "RETRAIN TIRE SENSORS - NO" is displayed.
- Press STEP button to select "YES".
- Press MENU button to start retraining. Display will read "TRAIN LEFT FRONT TIRE". The order for retraining all 5 sensors is: Left Front, Right Front, Right Rear, Left Rear, Spare (if so equipped).
- Starting at left front tire, place relearn magnet over valve stem. See Fig 1. Within approximately 5 seconds, vehicle horn will chirp indicating training complete at that particular sensor. Remove the magnet.
- Repeat this step on remaining sensors as indicated by EVIC until all TPM sensors positions are trained.
- Once EVIC displays "TRAINING COMPLETE", pressing either STEP, C/T, RESET or MENU button will exit training routine.
NOTE:
There is a 60-second timer for training the first sensor, and a 30-second timer between training the remaining sensors. If either of these timers expire, the EVIC will abort the training procedure.
NOTE:
If at any time the EVIC display reads "TRAINING ABORTED", move the vehicle ahead at least one foot and repeat the entire retraining procedure.