Diagnostic Test

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

PROGRAM ALL KEY FOBS

NOTE:

All Key Fobs that are to be used in this vehicle must remain on the front seat near the console during programming.

NOTE:

The RF-Hub must have a minimum of one programmed Key Fob for this DTC to be stored.

With the scan tool, select "Misc. Functions", "Program Ignition FOBIKs" and follow the instructions on the screen.
Program all Key Fobs that are to be used with this vehicle in accordance with Service Information.
Try each Key Fob that was programmed.
Do all Key Fobs operate properly?

Yes
- Test complete.
No
- With the scan tool perform the "RFH", "Reset ECU" and repeat this test from the beginning.