Roll Pins
ROLL PINS
| INDEX | DEPTH |
|---|---|
| 1. Shift Select Shaft | 11mm (0.43in) |
| 2. Reverse Lever | 11mm (0.43in) |
| 3. 1st/2nd Lever | 11mm (0.43in) |
| 4. Pin | 11mm (0.43in) |
| 5. 5th/6th Lever | 11mm (0.43in) |
| 6. Magnet | 11mm (0.43in) |
| 7. 3rd/4th Lever | 11mm (0.43in) |
| 8 A. Pin | 0.5mm (0.01in) |
| 8 B. Pin | 0mm (0in) |
| 8 C. Pin | 0mm (0in) |
| 9. Installation Direction | - |