Keyless Ignition Node (Kin) Or Keyless Go Button
WARNING: This page is about a different variant/trim than selected.
KEYLESS IGNITION NODE (KIN) OR KEYLESS GO BUTTON
| Refer to COMPONENT INDEX . |
- When the operator presses the Keyless Go button, the key fob is validated wirelessly by the RFH. If the key fob is recognized as belonging to the vehicle and is inside the vehicle, the system allows the ignition state of the vehicle to be changed by the operator between the ACCESSORY, RUN, and START ignition states.
- Used to broadcast the start button status.
Light Emitting Diode (LED) Indicator Operation:
The LEDs in the Keyless Go button provide visual indication of the ignition system and button use to aid the driver. The Logic for LED control is implemented in the RFH. The Keyless Go button contains four LEDs:
- OFF Indication
- ACC Indication (Accessory)
- ON Indication (ON or RUN)
- KIN switch indicator (button backlight)
The RFH will log a Diagnostic Trouble Code (DTC) indicating an incorrect ignition status value is present; in this state the ignition status is unknown. This will continue until the correct signal is received by the RFH.